Baofeng bf-f8hp chirp programming
I think I programmed some of the GMR and MURS frequencies because they all ended in zeros, so I didn't have to worry about spacing. Similarly, all the frequencies had a single DTSCode of 23, and all had the DTS Polarity set to NN. Secondly, I noticed that all the frequencies have a RTone and CTone of 88.5, but when I programmed the weather channel, I discovered that I needed to set the CTCSS tone (menu 11) to 0 so that I could hear the weather forecast, because if it I set it at 88.5, I'd hear nothing. I've been having to do this because Chirp either doesn't recognise the Baofeng UV5R because the only option I see is Baofeng UV5R3, or because I have a Prolific cable instead of a Chipset one. Does this mean I have to set the frequency step to 5 (menu 1, option 1? I later started programming some FRS, GMR, and MURS frequencies based on the CSV file that someone had given me. Meanwhile, the last column says TStep, which is set to 5 on all frequencies. So, I'm guessing I need to set the frequency step (menu 1) and set it to 6.25 kHz (option 2), or enter 462.500, and press up arrow? The smallest noise burst would easily pop open the squelch.
Baofeng bf f8hp chirp programming software#
Available in CHIRP software version: 20150111 or newer The factory squelch settings on these models has long been known to have little or no impact on the actual squelch level. BaoFeng BF-F8 and UV-5R Series Programming Software. Fixing the Baofeng Squelch Levels UV5R / UV82 / F8HP series. BaoFeng UV-82HP VIP Programming Software.
89 BAOFENG BF-F8HP 8-WATT DUAL BAND WALKIE TALKIE (136-174MHZ VHF & 400-520MHZ UHF) 75.
Baofeng bf f8hp chirp programming Pc#
I've been having to do this because Chirp either doesn't recognise the Baofeng UV5R because the only option I see is Baofeng UV5R3, or because I have a Prolific cable instead of a Chipset one.įirst, the FRS channels have some odd channel spacing that I can't figure out. The BF-F8HP is the most powerful BaoFeng capable of transmitting 8 watts A PC03 FTDI Programming Cable is Recommended for Easier PC Programming The. I later started programming some FRS, GMR, and MURS frequencies based on the CSV file that someone had given me. A programming cable (available here) and programming software are optional as the radio can be programmed manually To create a programming file that is compatible with the BF-F8HP DOWNLOAD from your radio FIRST. I've been using Repeater Book to manually programme some repeaters in my area, up to fifteen miles.